Tag: Innovative Materials Award

🎓 Educational Background

Master of Science (M.Sc) in Computational Materials Science (Since October 2018)

Technische Universität Bergakademie Freiberg, Germany
Dhaval is pursuing his Master’s degree in Computational Materials Science, focusing on numerical simulations, material modeling, and computational mechanics. He has developed strong expertise in multiscale modeling and material characterization techniques.

Bachelor of Technology (B.Tech) in Mechanical Engineering (July 2013 – June 2017)

Indus University, India
During his undergraduate studies, Dhaval specialized in mechanical engineering with a focus on design, manufacturing, and computational analysis. He gained knowledge in thermal systems, structural analysis, and fluid mechanics, which built the foundation for his advanced studies.

🔬 Research Experience

Researcher at Polymer Competence Center Leoben GmbH (Since May 2022)

Dhaval Patel has been working as a researcher at Polymer Competence Center Leoben GmbH since May 2022, where he contributes to cutting-edge research in polymer science and material mechanics. His work focuses on developing advanced computational models for analyzing the behavior of polymer-based materials, aiming to improve their performance and durability in industrial applications.

Doctoral Candidate at Montanuniversität Leoben

Currently, Dhaval Patel is pursuing his Ph.D. at Montanuniversität Leoben, specializing in computational material science. His research involves simulating material behavior at different scales to optimize their properties for engineering applications. By integrating computational methods with experimental validation, he is working on enhancing the understanding of complex material interactions.

Master Thesis Student at Technische Universität Freiberg (April 2020 – October 2021)

Under the supervision of Prof. Dr. rer. nat. habil. Meinhard Kuna, Dhaval conducted extensive research on computational modeling of composite materials. His work involved:

Implementing the Direct-FE2 Method, which was integrated with the Cohesive Zone Model to improve fracture analysis.

Developing an ABAQUS tool to simulate composite cantilever beams, allowing for a deeper understanding of material deformation.

Conducting a parametric study to analyze the interface between the matrix and fibers/inclusions in composite materials, identifying the most failure-prone regions and improving material reliability.

Scientific Assistant (HIWI) at TU Freiberg (September 2019 – October 2021)

As a scientific assistant in the Fracture Mechanics Department at TU Freiberg, Dhaval worked under Prof. Dr. rer. nat. habil. Meinhard Kuna on advanced material failure analysis. His key contributions included:

Working on the “Plasto Pro-Crack” project, focusing on fracture analysis in complex materials.

Studying the stepwise crack propagation and determining the Crack Tip Opening Displacement (CTOD), which helps in predicting material failure.

Conducting simulations and analyses of composite materials, aiding in the development of stronger and more resilient structures.

Internship in Maintenance Department at SV99 Auto Services Pvt. Ltd., India (July 2017 – December 2017)

Dhaval gained practical industrial experience during his internship at SV99 Auto Services Pvt. Ltd., India. He worked in the maintenance department, where he was responsible for troubleshooting mechanical systems, optimizing repair procedures, and ensuring efficient maintenance operations. This experience provided him with hands-on exposure to mechanical engineering applications.

Noted Publications📝

Article: Optimizing Children’s Hand Orthosis Design: A Study on Contact Pressure Distribution Using FSR Sensors

Authors: Dhaval Patel, Ivaylo Mitev, Thomas Rockenbauer, Thomas Antretter, Sandra Schloegl, Margit Lang
Journal: Materials & Design
Year: 2025

Article: A Comprehensive Methodology for Criticality Assessment of Microvias in Printed Circuit Board Assemblies

Authors: Kamble, V.G.; Patel, D.R.; Schipfer, C.; Thalhamer, A.; Zuendel, J.; Krivec, T.; Antretter, T.; Fuchs, P.F.
Journal: 2024 25th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2024
Year: 2024

Article: Optimizing Children’s Hand Orthosis Design: A Study on Contact Pressure Distribution Using FSR Sensors

Authors: Patel, D.R.; Mitev, I.; Rockenbauer, T.; Antretter, T.; Schloegl, S.; Lang, M.
Journal: SSRN
Year: 2024

Article: Single and Multi-material Topology Optimization of Continuum Structures: ABAQUS Plugin

Authors: Patel, D.; Rockenbauer, T.; Schlögl, S.; Lang, M.
Journal: Springer Proceedings in Mathematics and Statistics
Year: 2024

Article: Integration of Topology Optimization and Sizing Optimization Techniques for Advanced Orthotic Design

Authors: D. Patel, T. Rockenbauer, T. Antretter, S. Schloegl
Journal: 16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics
Year: 2024

Mr. Halil İbrahim Efkere | photocatalytic activity | Catalysis Innovation Award

Posted on 23/01/2025 by sciencefather

Mr. Halil İbrahim Efkere | photocatalytic activity | Catalysis Innovation Award

Mr. Halil İbrahim Efkere | Gazi University, Turkey

Professional Profiles

🎓 Education and Academic Journey

The academic journey of this individual reflects a strong foundation in physics and material science, marked by significant achievements at every stage. They completed their doctoral studies (Ph.D.) at Gazi University, Institute of Science, in Metallurgical and Materials Engineering, graduating on July 27, 2022. Their thesis, titled Development of WO₃ Memristor Devices, was conducted under the guidance of advisors Hakan Ateş and Saime Şebnem Aydın.

Prior to their doctorate, they earned a Master’s degree (M.Sc.) in Physics from Erciyes University, Institute of Science, graduating on January 7, 2014. Their master’s thesis, Growth and Characterization of InGaAs/GaAs Superlattice Structures by Molecular Beam Epitaxy (MBE) Technique, was supervised by Süleyman Özçelik and Tuncay Karaaslan.

Their academic journey began with a Bachelor’s degree in Physics from Selçuk University, Faculty of Science, completed on July 10, 2009.

👨‍🏫 Academic Title and Position

Currently, they serve as a Lecturer at Gazi University’s Photonic Application and Research Center. They were appointed to this position on February 27, 2020, where they actively contribute to both academic instruction and cutting-edge research.

🧪 Research Projects and Contributions

Their research portfolio includes significant contributions to material science and environmental applications. One of their ongoing projects is titled Investigation of Photocatalytic Activity of CeO₂ Thin Films Produced by RF Magnetron Sputtering Technique for Water Treatment Applications.Serving as the project executive, they collaborate with Abdullah Atılgan. This project, supported as a National Scientific Research Project by Higher Education Institutions, commenced on November 27, 2024, and is currently in progress.

Another notable project involves their role as a researcher in Production, Optimization, and Evaluation of TiO₂ Films Using Ultrasonic Chemical Sputtering Method for Photocatalytic Water Separation/Cleaning Applications. Led by executive Meryem Polat Gönüllü and supported by team members Emrah Sarıca, Damla Dilara Çakıl, and Fatih Kılıçkan, this initiative also benefits from national support. The project began on April 16, 2024, and remains an active investigation into sustainable environmental technologies.

Publications Top Noted📚

Effect of TiO₂-Surfactant Interface on the Electrical and Dielectric Properties of a Metal–Insulator–Semiconductor (MIS) Structure

Authors: Azizian-Kalandaragh, Y.; Efkere, H.I.; Barkhordari, A.; Pirgholi-Givi, G.R.; Altındal, Ş.

Journal: Journal of Electronic Materials

Year: 2025

Analysis of Nb-doped and undoped TiO₂ nanocoatings with varying dopant concentrations

Authors: Arslan, Ö.; Efkere, H.İ.; Çokduygulular, E.; İldeş, C.; Kınacı, B.

Journal: Journal of Materials Science: Materials in Electronics

Year: 2025

Structural, morphological, optical and electrical characterization of MgO thin films grown by sputtering technique on different substrates

Authors: Toprak, B.Ç.; Efkere, H.İ.; Aydın, S.Ş.; Tataroğlu, A.; Özçelik, S.

Journal: Journal of Materials Science: Materials in Electronics

Year: 2024

Electrical and dielectric behaviors of Al/SiO₂-surfactant/n-Si Schottky structure in wide range of voltage and frequency

Authors: Efkere, H.İ.; Barkhordari, A.; Marmiroli, B.; Altındal, Ş.; Azizian-Kalandaragh, Y.

Journal: Physica Scripta

Year: 2024

Detailed analysis of the structural, morphological, optical, electrical, and dielectric properties of the reactively produced WO₃ nanostructure

Authors: Efkere, H.İ.; Özçelik, S.

Journal: Journal of Materials Science: Materials in Electronics

Year: 2023

Mr. Yifan Li | Materials Science | Best Researcher Award

Posted on 08/11/2024 by sciencefather

Mr. Yifan Li | Materials Science | Best Researcher Award

Mr. Yifan Li | Zhengzhou University | China

Professor Yifan Li, currently based at the School of Chemical Engineering, Zhengzhou University, has dedicated his career to pioneering research in membrane materials and separation processes. With a comprehensive academic background from Tianjin University and extensive professional experience, Professor Li is recognized for his contributions to the field of materials science, focusing on high-performance materials for molecular and ionic separation.

Professional Profiles

🎓 Academic and Professional Background

Yifan Li graduated from a postgraduate and doctoral program at Tianjin University in 2014. Since then, he has served at the School of Chemical Engineering at Zhengzhou University, formerly known as the “School of Chemical Engineering and Energy” prior to 2019. Professor Li’s research specialization involves developing innovative materials and chemistries to enable fast and selective transport of small molecules and ions. He has also collaborated with Professor Suzana P. Nunes’s research group at King Abdullah University of Science and Technology (KAUST).

🌍 Professional Memberships

Senior Member, International Association for Carbon Capture (IACC)

🔬 Areas of Research

Professor Li’s research focuses on membrane materials and membrane separation processes. His work advances the understanding and creation of high-performance membrane materials applicable in areas such as gas separation, organic solvent nanofiltration, and ion exchange processes.

🚀 Research Impact and Vision

Professor Li is dedicated to improving membrane technology for efficient and selective molecule/ion transport. His research provides valuable insights into molecular behavior within membranes, particularly how liquid molecules determine the movement of both themselves and other molecules/ions. This work supports the development of novel nanochannel membranes, such as two-dimensional (2D) lamellar membranes and microphase separation ionomic membranes, enhancing reliability and efficiency in separating similar molecules and ions.

Publications Top Noted📚

Separation of xylene isomers controlled by adsorption configuration on fluorinated lamellar membrane

Authors: Liu, S., Wu, X., Yang, Z., Li, Y., Wang, J.

Journal: Journal of Membrane Science

Year: 2025

Two-Dimensional Acid-Base Hydrogen-Bonded Organic Framework toward a Highly Conductive Proton Exchange Membrane

Authors: Wang, C., Yang, Z., Wu, W., Dai, K., Wang, J.

Journal: Chemistry of Materials

Year: 2024

Geometric tortuosity model of pores in concrete composite materials

Authors: Zheng, H., Cui, L., Sun, G., Sun, J., Li, Y.

Journal: Construction and Building Materials

Year: 2024

Reinforced integrated membrane electrode assembly based on ionomer wet-binding and ePTFE reinforcement strategy for proton exchange membrane fuel cells

Authors: Xing, Y., Liu, L., Fu, Z., Li, Y., Li, H.

Journal: International Journal of Hydrogen Energy

Year: 2024

Organic-inorganic hybrid two-dimensional membranes with enhanced solvent flux and stability

Authors: Li, H., Shi, F., Chen, S., Li, Y.

Journal: Separation and Purification Technology

Year: 2024

Dr. Kshipra Sharma, Materials Science, Best Researcher Award

Posted on 04/10/2024 by sciencefather

Dr. Kshipra Sharma, Materials Science, Best Researcher Award

Doctorate at Lund University, Sweden

Professional Profile

⭐Summary

Dr. Sharma is currently a Postdoctoral Researcher (Jan 2024 – Dec 2025) at the Centre for Analysis and Synthesis, Lund University. This position is funded by the Wallenberg Initiative for Sustainable Energy (WISE). Her project focuses on the investigation of the formation dynamics of novel earth-abundant nickel phosphide catalysts using Environmental Transmission Electron Microscopy for CO2 capture and conversion.

🎓Educational Background

Dr. Sharma earned her PhD in Nanoelectronics and Nanotechnologies from the Atomic Energy and Alternative Energies Commission (CEA) in Grenoble, France (Sept 2019 – Dec 2022). Her thesis examined atomic-scale defects in two-dimensional materials using advanced transmission electron microscopy techniques. She also holds an Integrated Bachelor & Master of Engineering (B.Tech-M.Tech) in Nanotechnology from the Centre for Converging Technologies, University of Rajasthan, India (2011 – 2017), graduating with honors (70.60%).

💼 Research Experience

Prior to her current role, Dr. Sharma served as a Senior Research Fellow at the Department of Physics, Malaviya National Institute of Technology, Jaipur, India (Mar 2018 – Aug 2019), where she worked on the fabrication and modification of metal-fullerene nanocomposites for optical devices. She completed a Research Internship in the Department of Energy & Environment at the same institute (Aug 2017 – Mar 2018), focusing on the development of flexible supercapacitors for wearable electronics. Additionally, during her Graduate Research Internship at the Department of Biomedical Engineering, Indian Institute of Technology, Hyderabad, India (Apr 2016 – Oct 2016), she developed a targeted nano-drug delivery system for cancer treatment.

Publications Top Noted📚

Flexible supercapacitor based on three‐dimensional cellulose/graphite/polyaniline composite

Authors: Kshipra Sharma, Kapil Pareek, Rupesh Rohan, Pawan Kumar

Journal: International Journal of Energy Research

Year: 2019

Low temperature, easy scaling up method for development of smart nanostructure hybrid lipid capsules for drug delivery application

Authors: Sunil Kumar Yadava, Suparna Mercy Basu, Meenakshi Chauhan, Kshipra Sharma, Arpan Pradhan, V Remya, Jyotsnendu Giri

Journal: Colloids and Surfaces B: Biointerfaces

Year: 2020

Temperature induced surface plasmon resonance in Au/aC nanocomposite thin film

Authors: Ritu Vishnoi, Kshipra Sharma, Ganesh D Sharma, Rahul Singhal

Journal: Vacuum

Year: 2019

Investigation of sequential thermal annealing effect on Cu-C70 nanocomposite thin film

Authors: Ritu Vishnoi, Kshipra Sharma, Shriniwas Yadav, Rahul Singhal

Journal: Thin Solid Films

Year: 2019

Practice of electron microscopy on nanoparticles sensitive to radiation damage: CsPbBr3 nanocrystals as a case study

Authors: Tuan M Duong, Kshipra Sharma, Fabio Agnese, Jean-Luc Rouviere, Hanako Okuno, Stéphanie Pouget, Peter Reiss, Wai Li Ling

Journal: Frontiers in Chemistry

Year: 2022

Synthesis and characterization of Cu-C60 plasmonic nanocomposite

Authors: Rahul Singhal, Kshipra Sharma, Ritu Vishnoi

Journal: Physica B: Condensed Matter

Year: 2018

Dr. Amira Boseila, Materials Science, Women Researcher Award

Posted on 25/09/2024 by sciencefather

Dr. Amira Boseila, Materials Science, Women Researcher Award

Doctorate at Sinai University, Egypt

Professional Profiles

🎓Educational Background

Dr. Amira Abdel Halim Hamada Boseila has a rich academic background in pharmaceutical sciences. She earned her Doctor of Philosophy (PhD) in Pharmaceutical Sciences from the Faculty of Pharmacy, Cairo University in February 2020. Her PhD thesis focused on “Utility of nanocarriers for targeted delivery of an antiviral drug to the liver.” Prior to that, she obtained her Master’s in Pharmaceutical Sciences from the same institution in December 2013, with her thesis titled “Formulation and Evaluation of Modified Nasal Drug Delivery System of an Antiemetic Drug: Ondansetron.” Additionally, Dr. Boseila completed a Total Quality Management Diploma (TQM) from the American University of Cairo in 2009, further strengthening her expertise in quality control management. She began her academic journey with a Bachelor of Pharmaceutical Sciences from Cairo University in May 2007, graduating with a “very good” grade. Her early education was at La Rose De Lisieux Language School, Dokkie, where she specialized in science.

🔬Research Interests

Dr. Boseila’s research interests span across several cutting-edge areas within pharmaceutical sciences. Her focus includes nanomedicine, drug targeting, modified release dosage forms, novel drug delivery systems, and quality by design. These interests guide her contributions to the field, particularly in exploring innovative approaches to drug formulation and delivery.

💼Career History and Professional Experience

Dr. Boseila is currently a Full-time Lecturer of Pharmaceutical Sciences at the Faculty of Pharmacy, Sinai University, where she has been since September 2022. In this role, she teaches various PharmD courses such as “Advanced Drug Delivery Systems,” “Design of Dosage Forms,” and several key subjects in pharmaceutics and pharmaceutical technology. Before this full-time position, she was a Part-time Lecturer at Sinai University, delivering lectures on Industrial Pharmacy and Hospital Pharmacy from February to June 2022.

In parallel, Dr. Boseila has served as a Post-doctoral Researcher at the Department of Pharmaceutics, Egyptian Drug Authority in Giza, Egypt, since July 2020. She has also been an Associate Researcher of Pharmaceutics and Lead Quality Control Specialist at the National Organization for Drug Control and Research (NODCAR) between January 2018 and March 2020. In her professional roles, Dr. Boseila has held key management positions, including Head of the Comparative Dissolution Unit at the Egyptian Drug Authority and Technical Manager of the Physicochemical Lab.

Additionally, she has contributed as a Guest Lecturer for the “Drug Targeting” course at the Applied Biotechnology Department, Faculty of Science, Ain Shams University, a position she has held since October 2020.

🧪Projects and Research Contributions

Dr. Boseila has actively participated in several significant research projects. In June 2023, she led a project titled “Repurposing of Anti-inflammatory Active for the Treatment of Inflammatory Pulmonary Diseases,” funded by the University of Hail. This project, with a 12-month duration, focuses on innovative treatments for pulmonary conditions. Another notable project she spearheaded was the development of a “Nano Phyto-throat spray,” aimed at providing an effective post-exposure prophylaxis and treatment strategy for COVID-19. This project, funded by the Misr El Kheir Foundation, ran from October 2021 for 12 months.

Publications Top Noted📚

Throat Spray Formulated with Virucidal Pharmaceutical Excipients

Authors: Boseila, A.A., Ghareeb, A.Z., AbdElwahab, M.G., Yassa, N.W., Ghareeb, D.A.

Journal: European Journal of Pharmaceutics and Biopharmaceutics

Year: 2024

Antidepressant and Cardioprotective Effects of Self-Nanoemulsifying Self-Nanosuspension Loaded with Hypericum perforatum on Post-Myocardial Infarction Depression in Rats

Authors: Khalil, H.M.A., Mahmoud, D.B., El-Shiekh, R.A., Naggar, R.A., Eliwa, H.A.

Journal: AAPS PharmSciTech

Year: 2022

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review

Authors: Damiri, F., Andra, S., Kommineni, N., Berrada, M., Cavalu, S.

Journal: Materials

Year: 2022

Iron Oxide Nanoparticles-Plant Insignia Synthesis with Favorable Biomedical Activities and Less Toxicity, in the “Era of the-Green”: A Systematic Review

Authors: Hamdy, N.M., Boseila, A.A., Ramadan, A., Basalious, E.B.

Journal: Pharmaceutics

Year: 2022

In Silico and in Vitro Studies for Benzimidazole Anthelmintics Repurposing as VEGFR-2 Antagonists: Novel Mebendazole-Loaded Mixed Micelles with Enhanced Dissolution and Anticancer Activity

Authors: Elmaaty, A.A., Darwish, K.M., Chrouda, A., Mustafa, M., Al-Karmalawy, A.A.

Journal: ACS Omega

Year: 2022

Superiority of DEAE-Dx-Stabilized Cationic Bile-Based Vesicles over Conventional Vesicles for Enhanced Hepatic Delivery of Daclatasvir

Authors: Boseila, A.A., Rashed, H.M., Sakr, T.M., Abdel-Reheem, A.Y., Basalious, E.B.

Journal: Molecular Pharmaceutics

Year: 2019

Ms. Saira Naz, Materials Science, Best Researcher Award

Posted on 24/06/2024 by sciencefather

Ms. Saira Naz, Materials Science, Best Researcher Award

Ms. Saira Naz, Quaid-I-Azam University, Pakistan

Professional Profile

Summary 🌟

Saira Naz is a dedicated mathematician with a strong academic background and a passion for research. She holds a Ph.D. in Mathematics from Quaid-i-Azam University, Islamabad, along with an M.Phil. and M.Sc. in Mathematics from the same institution. With a B.Sc. from Punjab University and a solid foundation from her schooling at Army Public School & College, Quaid-e-Azam Colony, Rawalpindi, Saira has consistently excelled in her academic pursuits.

Education 📚

Ph.D. in Mathematics, Quaid-i-Azam University, Islamabad, 2022
M.Phil. in Applied Mathematics, Quaid-i-Azam University, Islamabad, 2018
M.Sc. in Mathematics, Quaid-i-Azam University, Islamabad, 2014
B.Sc. in Mathematics (A + B) and Statistics, Punjab University, 2011
F.Sc. in Math, Stat, Computer Science, Army Public School & College, Qasim Aviation Base, Dhamiyal Camp, RWP, 2009
Matric in Math, Physics, Chemistry & Biology, Quaid Science Academy, Quaid-e-Azam Colony, Rawalpindi, 2007

Professional Experience 💼

Faculty, Air University, Islamabad
Visiting Faculty, Bahria University
Permanent Faculty, Islamabad College of Management & Commerce, Rawalpindi
Lecturer, Spring Field Public School and College, Harley-2 Campus, Rawalpindi

Research Interest 🔍

Numerical modeling and analysis
Nanofluid dynamics
Heat transfer
Non-Newtonian fluid mechanics
Mathematical modeling in fluid mechanics

Notable Publication📝

Title: Significance of nonlinear radiation in entropy generated flow of ternary-hybrid nanofluids with variable thermal conductivity and viscous dissipation
- Authors: S. U. S. Choi, J. A. Eastman
- Journal: ASME Journal of Heat Transfer
- Volume: 112
- Issue: 4
- Pages: 1054-1062
- Year: 1990
Title: Melting and dissipative effects about entropy induced Darcy-Forchheimer flow involving ternary-hybrid nanofluids
- Authors: M. Sheikholeslami, D. D. Ganji
- Journal: International Journal of Heat and Mass Transfer
- Volume: 130
- Issue: Part A
- Pages: 937-944
- Year: 2019
Title: Entropy optimized radiative flow conveying hybrid nanomaterials (MgO-MoS2/C2H6O2) with melting heat characteristics and Cattaneo-Christov theory: OHAM analysis
- Authors: N. Bachok, A. Ishak, I. Pop
- Journal: Journal of Molecular Liquids
- Volume: 245
- Issue: 1
- Pages: 623-631
- Year: 2017
Title: Soret and Dufour impacts in entropy optimized MHD flow by third-grade liquid involving variable thermal characteristics
- Authors: R. Ellahi, S. Rafiq, N. Saleem
- Journal: Applied Mathematics and Mechanics
- Volume: 40
- Issue: 3
- Pages: 287-298
- Year: 2019
Title: Numerical modeling and analysis of non-Newtonian nanofluid featuring activation energy
- Authors: K. Vajravelu, A. S. Bal, C. J. Reddy
- Journal: International Journal of Thermal Sciences
- Volume: 49
- Issue: 6
- Pages: 1079-1088
- Year: 2010

Mr. Yavuz Selim AKSÜT, Materials Science, Best Researcher Award

Posted on 24/06/2024 by sciencefather

Mr. Yavuz Selim AKSÜT, Materials Science, Best Researcher Award

Mr. Yavuz Selim AKSÜT, Gümüşhane University, Turkey

Professional Profile